首页 门户 资讯 详情
  • 评论
  • 收藏

潞城百科网 2021-01-23 450 10

广东省明义机械贸易有限公司链条安装主要事项

广东省明义机械贸易有限公司链条安装主要事项
1、各传动链轮在同一中心线上,不允许有偏摆倾斜现象,否则将使链传动机构及链条过失磨损。
2、链条连接接销上的卡簧(锁片)卡入连接销的颈槽之中,以确保链条的运转安全。
3、卡簧的装置方向,是卡簧的开口方向和链条运转方向相反,以防止卡簧在运转中被碰撞而脱离。

链条的润滑
1、润滑油和润滑脂的目的主要是为了减缓链条的磨损和腐蚀,因为磨损大多发生在链条传动时弯曲部位的销轴和套筒之间。因此一定要在该部位注入润滑油。
2、在链条传动的松边部位,外链节与内链节的间隙内请注入润滑油,同时在套筒与滚子之间也应保持适量的润滑油。

欢迎各位拨打电话: 0317-2908675,或者到我们网站了解更多摩托车链轮!http://www.mingyishiye.com/



Ming Yi Machinery (Guangdong) Trading Co., Ltd. 
Main issues of chain installation:
1、Each sprocket should be in the same center line, no deflection and incline permitted. Otherwise the chain drive mechanism or chain fault worn.
2、The circlip in the connecting pin should be installed in the place to secure chain.
3、The opening direction of circlip should be opposite to the chain drive direction to prevent the circlip from falling off due to impact load during chain operation.

Lubrication of chain
1、The lubrication oil and grease will slow the wear and corrosion rate efficiently and the wear usually occurs in the bend place between pin and bush during the chain drive operation, so this place should be lubricated.
2、Inject the lubrication oil into the gap between outer link and inner link of the loose side of chain and in the meantime the gap between bush and pin should also be lubricated properly.

Welcome to call: 0317-2908675, or visit our website to learn more about motorcycle sprockets! http://www.mingyishiye.com/

鲜花

握手

雷人

路过

鸡蛋

分享

邀请

下一篇:暂无上一篇:暂无

最新评论(0)

Archiver|手机版|小黑屋|潞城百科网  

© 2015-2020 Powered by 潞城百科网 X1.0

微信扫描